Quick Start Guide

This quick start guide is meant for managers who want to start running a pool right away.

Prerequisites

This guide requires the Solana CLI tool suite and Stake Pool CLI tool.

• Install the Solana Tools
• Install the Stake Pool CLI

You must also have an account with SOL. The guide will assume that you are using the default keypair created at the default location using solana-keygen new. Note that it is possible to override the default keypair with every command if needed.

If you are running on localhost using solana-test-validator, the default keypair will automatically start with 500,000,000 SOL.

If you are running on devnet or testnet, you can airdrop funds using solana airdrop 1.

If you are running on mainnet-beta, you must purchase funds some other way, from an exchange, a friend, etc.

Sample scripts

This guide uses the sample scripts on GitHub to run everything quickly and easily.

You'll see the following scripts:

• setup-test-validator.sh: sets up a local test validator with validator vote accounts
• setup-stake-pool.sh: creates a new stake pool with hardcoded parameters
• add-validators.sh: adds validators to the stake pool
• deposit.sh: performs stake and SOL deposits
• rebalance.sh: rebalances the stake pool
• withdraw.sh: performs some withdrawals

This guide will use most of these scripts to setup a stake pool on a local network.

(Optional) Step 0: Setup a local network for testing

All of these scripts can be run against devnet, testnet, or mainnet-beta, but to allow for more experimentation, we will setup a local validator with some validator vote accounts using setup-test-validator.sh.

The script accepts the number of vote accounts to create and file path to output validator vote accounts, e.g.:

$ ./setup-test-validator.sh 10 local_validators.txt

This will take roughly 10 seconds, eventually outputting a file with list of base58-encoded public keys. These represent validator vote accounts on the local network, e.g.:

EhRbKi4Vhm1oUCGWHiLEMYZqDrHwEd7Jgzgi26QJKvfQ
J3xu64PWShcMen99kU3igxtwbke2Nwfo8pkZNRgrq66H
38DYMkwYCvsj8TC6cNaEvFHHVDYeWDp1qUgMgyjNqZXk
7q371UZcYJTMmFPeijUJ6RBr6jHE9t4mDd2gnDs7wpje
7ffftyketRJrmCcczhSnWatxB32SzAG3dhDpnyRdm91d
HtqJXQNWr4E1qxftAxxqNnHbpSYnokayHSxurzS9vKKF
4e6EmSSmExdRM6tF1osYiAq9HxXN5oVvDqS78FcT6F4P
DrT6VGqqJT1GRVaZmuEjNim4ie7ecmNixjiycd67jyJy
71vNo5HBuAtejbcQYp9CdBeT7npVdbJqjmuWbXbNeudq
7FMebvnWnWN45KF5Fa3Y7kAJZReKU6WLzribtWDJybax

Note: this will fail if another solana-test-validator is already running.

Important notes on local network

If you are using epochs of 32 slots, there is a good chance that you will pass an epoch while using one of the stake pool commands, causing it to fail with: Custom program error: 0x11. This is totally normal, and will not happen on the other networks. You simply need to re-run the command.

Since there is no voting activity on the test validator network, you will need to use the secret --force flag with solana delegate-stake, ie:

$ solana delegate-stake --force stake.json CzDy6uxLTko5Jjcdm46AozMmrARY6R2aDBagdemiBuiT

Step 1: Create the stake pool

Our next script is setup-stake-pool.sh. In it, you will see a large section in which you can modify parameters for your stake pool. These parameters are used to create a new stake pool, and include:

• epoch fee, expressed as two different flags, numerator and denominator
• withdrawal fee, expressed as two different flags, numerator and denominator
• deposit fee, expressed as two different flags, numerator and denominator
• referral fee, expressed as a number between 0 and 100, inclusive
• maximum number of validators (highest possible is 2,950 currently)
• (Optional) deposit authority, for restricted pools

Although fees may seem uninteresting or scammy at this point, consider the costs of running your stake pool, and potential malicious actors that may abuse your pool if it has no fees.

Each of these parameters is modifiable after pool creation, so there's no need to worry about being locked in to any choices.

Modify the parameters to suit your needs. The fees are especially important to avoid abuse, so please take the time to review and calculate fees that work best for your pool.

Carefully read through the Fees for more information about fees and best practices.

In our example, we will use fees of 0.3%, a referral fee of 50%, opt to not set a deposit authority, and have the maximum number of validators (2,350). Next, run the script with the amount of SOL to deposit. We'll use 15 SOL:

$ ./setup-stake-pool.sh 15
Creating pool
+ spl-stake-pool create-pool --epoch-fee-numerator 3 --epoch-fee-denominator 1000 --withdrawal-fee-numerator 3 --withdrawal-fee-denominator 1000 --deposit-fee-numerator 3 --deposit-fee-denominator 1000 --referral-fee 50 --max-validators 2350 --pool-keypair keys/stake-pool.json --validator-list-keypair keys/validator-list.json --mint-keypair keys/mint.json --reserve-keypair keys/reserve.json
Creating reserve stake 4tvTkLB4X7ahUYZ2NaTohkG3mud4UBBvu9ZEGD4Wk9mt
Creating mint BoNneHKDrX9BHjjvSpPfnQyRjsnc9WFH71v8wrgCd7LB
Creating associated token account DgyZrAq88bnG1TNRxpgDQzWXpzEurCvfY2ukKFWBvADQ to receive stake pool tokens of mint BoNneHKDrX9BHjjvSpPfnQyRjsnc9WFH71v8wrgCd7LB, owned by 4SnSuUtJGKvk2GYpBwmEsWG53zTurVM8yXGsoiZQyMJn
Creating pool fee collection account DgyZrAq88bnG1TNRxpgDQzWXpzEurCvfY2ukKFWBvADQ
Signature: 51yf2J6dSGAx42KPs2oTMTV4ufEm1ncAHyLPQ6PNf4sbeMHGqno7BGn2tHkUnrd7PRXiWBbGzCWpJNevYjmoLgn2
Creating stake pool Zg5YBPAk8RqBR9kaLLSoN5C8Uv7nErBz1WC63HTsCPR with validator list 86VZZCuqiz7sDJpFKjQy9c9dZQN9vwDKbYgY8pcwHuaF
Signature: 47QHcWMEa5Syg13C3SQRA4n88Y8iLx1f39wJXQAStRUxpt2VD5t6pYgAdruNRHUQt1ZBY8QwbvEC1LX9j3nPrAzn
Depositing SOL into stake pool
Update not required
Using existing associated token account DgyZrAq88bnG1TNRxpgDQzWXpzEurCvfY2ukKFWBvADQ to receive stake pool tokens of mint BoNneHKDrX9BHjjvSpPfnQyRjsnc9WFH71v8wrgCd7LB, owned by 4SnSuUtJGKvk2GYpBwmEsWG53zTurVM8yXGsoiZQyMJn
Signature: 4jnS368HcofZ1rUpsGZtmSK9kVxFzJRndSX5VS7eMV3kVgzyg9efA4mcgd2C6BoSNksTmTonRGXTVM1WMywFpiKq

Your stake pool now exists! For the largest number of validators, the cost for this phase is ~2.02 SOL, plus 15 SOL deposited into the pool in exchange for pool tokens.

Step 2: Deposit SOL into the pool

Now that the pool exists, let's deposit some SOL in exchange for some pool tokens.

SOL will likely be the most attractive form of deposit, since it's the easiest for everyone to use. Normally, this will likely be done from a DeFi app or wallet, but in our example, we'll do it straight from the command line.

We already deposited 15 SOL during creation of the pool, but let's deposit another 10 SOL into the pool:

$ spl-stake-pool deposit-sol Zg5YBPAk8RqBR9kaLLSoN5C8Uv7nErBz1WC63HTsCPR 10
Using existing associated token account DgyZrAq88bnG1TNRxpgDQzWXpzEurCvfY2ukKFWBvADQ to receive stake pool tokens of mint BoNneHKDrX9BHjjvSpPfnQyRjsnc9WFH71v8wrgCd7LB, owned by 4SnSuUtJGKvk2GYpBwmEsWG53zTurVM8yXGsoiZQyMJn
Signature: 4AJv6hSznYoMGnaQvjWXSBjKqtjYpjBx2MLezmRRjWRDa8vUaBLQfPNGd3kamZNs1JeWSvnzczwtzsMD5WkgKamA

Step 3: Add validators to the pool

Now that the pool has some SOL, we need to add validators to it.

Using add-validators.sh, we'll add each of the validators created during step 0 to the stake pool. If you are running on another network, you can create your own file with validator vote accounts.

$ ./add-validators.sh keys/stake-pool.json local_validators.txt
Adding validator stake accounts to the pool
Adding stake account 3k7Nwu9jUSc6SNG11wzufKYoZXRFgxWamheGLYWp5Rvx, delegated to EhRbKi4Vhm1oUCGWHiLEMYZqDrHwEd7Jgzgi26QJKvfQ
Signature: 5Vm2n3umPXFzQgDiaib1B42k7GqsNYHZWrauoe4DUyFszczB7Hjv9r1DKWKrypc8KDiUccdWmJhHBqM1fdP6WiCm
Signature: 3XtmYu9msqnMeKJs9BopYjn5QTc5hENMXXiBwvEw6HYzU5w6z1HUkGwNW24io4Vu9WRKFFN6SAtrfkZBLK4fYjv4
... (something similar repeated 9 more times)

This operation moves 1.00228288 SOL from the reserve to a stake account on a given validator. This means you'll need over 1 SOL for each validator that you want to add.

Step 4: Deposit stakes into the pool

Now that your pool has validators, it can accept stake accounts for you to manage. There are two possible sources of deposits: SOL or stake accounts. In step 2, we deposited SOL directly, so now we'll deposit stake accounts.

This option is particularly attractive for users that already have a stake account, and either want stake pool tokens in return, or to diversify their stake more.

The deposit.sh script gives an idea of how this works with the CLI.

Creates new stakes to deposit a given amount into each of the stake accounts in the pool, given the stake pool and validator file.

$ ./deposit.sh keys/stake-pool.json local_validators.txt 10

Note: This is a bit more finicky on a local network because of the short epochs, and may fail. No problem, you simply need to retry.

Step 5: Rebalance stake in the pool

Over time, as people deposit SOL into the reserve, or as validator performance varies, you will want to move stake around. The best way to do this will be through an automated system to collect information about the stake pool and the network, and decide how much stake to allocate to each validator.

The Solana Foundation maintains an open-source bot for its delegation program, which can be adapted for your stake pool. The source code is part of the stake-o-matic GitHub repo.

Additionally, there is a work-in-progress Python stake pool bot, found at the stake-pool-py on GitHub.

For our example, we will run a simple pool rebalancer, which increases the stake on each validator in the list by the given amount. There are no checks or logic to make sure that this is valid.

$ ./rebalance.sh keys/stake-pool.json local_validators.txt 1

Step 6: Withdraw from the stake pool

Finally, if a user wants to withdraw from the stake pool, they can choose to withdraw SOL from the reserve if it has enough SOL, or to withdraw from one of the stake accounts in the pool.

The withdraw.sh script removes stakes and SOL from each of the stake accounts in the pool, given the stake pool, validator file, and amount.

$ ./withdraw.sh keys/stake-pool.json local_validators.txt 1