Skip to main content

Intro to Token Extensions

Summary​

  • The existing Token Program on Solana provides interfaces for fungible and non-fungible tokens. However as new features have been needed, various forks of Token Program have been created to add features, posing adoption challenges across the ecosystem.
  • To introduce new token features without disrupting current users, wallets, and decentralized applications (dApps), and to ensure the safety of existing tokens, a new token program, Token Extensions Program (also called Token-2022), has been developed.
  • Token Extensions Program is a separate program with a separate address from the original Token Program. It supports the exact same functions plus additional ones through extensions.

Overview​

The Token Extensions Program, previously know as Token 2022, is a superset of the functionality provided by the original Token Program. The Token Program serves most needs for fungible and non-fungible tokens through a simple set of interfaces and structures. Though simple and performant, the Token Program lacked features that the developer community soon found need of. This necessitated forks of the Token Program, potentially splitting the ecosystem.

For example, say a university wants to send an NFT version of a diploma to a graduate's wallet. How can we be sure that diploma is never transferred away to a third party? In the current Token Program, this is not possible - we would need a check in the transfer instruction that rejects all transactions. One solution to this would be fork the Token Program, and add the check. However this means it would be an entirely separate token program. The university would have to run a campaign for wallets and degree-checking dapps to adopt it. Additionally, what if different universities want different functionality? There would have to be some sort of University DAO just to manage these internal debates - maybe there would be several University DAOs... Or they could just use the non-transferable token extension in the new Token Extension Program. Which is a core Solana program, adopted by everyone.

This is why the Token Extension Program was created, to vastly improve the functionality and customization of the most wanted and requested features from the original Token Program. And it does so by 100% supporting all of the functions developers are used to in the original and leaves room for future improvements. Though it is a second program, two programs are much easier to adopt than dozens.

This being said, the Token Extensions Program, is deployed to a separate address. Even if the interfaces of these two programs are same, the addresses of these programs are not interchangeable in any case. Meaning a token created with the Token Program, cannot interact with the Token Extension Program. As a result, if we want to add support for Token Extensions program, our client application will need some extra logic to differentiate between the tokens owned by these two programs.

Last note - The Token Extension Program does not completely replace the Token Program, if the use-case of a particular token is very simple, it may not need extensions. In this case, the original Token Program would be ever-so-slightly preferable to use since the program does not need to go through any of the additional extension checks.

Extensions​

The extensions of the Token Extension Program are just that, extensions. Meaning any extra data needed for the extension is tagged at the end of the Mint and Token accounts that we're familiar with. This is crucial for the interfaces of the Token Program and Token Extension Program to match up.

As of writing there are 16 extensions, four on the Token accounts, and 12 on the Mint accounts:

Account extensions currently include:

  • Required memos This extension makes it mandatory to have a memo on on all transfers, just like traditional banking systems.

  • Immutable ownership A token account's owner can normally transfer ownership to any other address, which is useful in many scenarios but can lead to security vulnerabilities, especially when dealing with Associated Token Accounts (ATAs). To avoid these issues, we can use this extension which makes it impossible to reassign account ownership.

All Token Extension Program ATAs have the immutable ownership extension baked in.

  • Default account state Mint creators can use this extension which forces all new token accounts to be frozen. This way, users must eventually interact with some type of service to unfreeze their accounts and use the tokens.

  • CPI guard This extension safeguards users against authorizing actions that are not visible to them, specifically targeting concealed programs that are neither the System nor Token programs. It does this by restricting certain activities within cross-program invocations.

Mint extensions include:

  • Transfer fees The Token Extension Program implements transfer fees at the protocol level, deducting a certain amount from each transfer to the recipient's account. This withheld amount is inaccessible to the recipient, and is redeemable by whatever address the mint creator dictates.

  • Closing mint Under the Token Program, only token accounts could be closed. However, the introduction of the close authority extension now allows for the closure of mint accounts as well.

To close a mint account, the supply has to be 0. So all tokens minted must be burned.

  • Interest-bearing tokens Tokens which have constantly fluctuating values, showing the updated values in clients requires proxies that require regular rebase or update operations. With this extension, we can change how the UI amount of tokens are represented by setting an interest rate on the token and fetching it's amount with interest at any time. Note, the interest on the token is purely aesthetic and does not change the amount of tokens within an account.

  • Non-transferable tokens This extension enables the creation of tokens that are "bound" to their owner, meaning they cannot be transferred to others.

  • Permanent delegate This extension allows us to specify a permanent delegate for a mint. This authority has unlimited delegate privileges over any token account of that mint. This means that it can burn or transfer any amount of tokens from any account. Permanent delegate can be used for example by membership programs to revoke access tokens, or by stablecoin issuers to revoke balances owned by sanctioned entities. This Extension is powerful and dangerous.

  • Transfer hook This extension allows token creators to have more control over how their tokens are transferred, by allowing a callback "hook" function onchain. The creators must develop and deploy a program that implements the hook interface and then configure their token mint to use their program. Then, on any transfer of that mint, the transfer hook will be called.

  • Metadata pointer A mint can have multiple different accounts claiming to describe the mint. This extension allows the token creator to designate an address that describes the canonical metadata. The pointer can be an external account, like a Metaplex metadata account, or if using the metadata extension, self pointing.

  • Metadata This extension allows a mint creator to include their token's metadata directly into the mint account. This is always used in conjunction with the metadata pointer extension.

  • Group pointer Think of a group of tokens much like a "collection" of tokens. More specifically, in an NFT collection, the mint with the group pointer extension would be considered to be the collection NFT. This extension contains a pointer to an account that conforms to the Token-Group Interface.

  • Group This stores the group information within the mint itself. It is always used in conjunction with the group pointer extension.

  • Member pointer The inverse of the group pointer is the member pointer. This pointer points to an account that holds the member data, like which group it's a part of. In a collection of NFTs, these would be the NFTs in the collection.

  • Member This stores the member information within the mint itself. It's always used in conjunction with the member pointer extension.

  • Confidential transfers This extension enhances privacy of the transactions without revealing key details of the transaction such as the amount.

These extensions can be mixes and matched to make a plethora of highly functional tokens.

We'll dig deeper into each extension in separate lessons.

Things to consider when working with both Token Program and Token Extension Program​

Although the interfaces for both of these programs remain consistent, they are two different programs. The program IDs of these programs are not interchangeable, and the addresses created by using them are different. If you want to support both Token Program tokens and Token Extension Program tokens, you must add extra logic on the client side and program side. We will dive into these implementations in later lessons.

Lab​

Now, we will test out some of these extensions using the spl-token-cli CLI.

1. Getting Started​

Before we can use the extensions, we need to install the spl-token-cli. Follow the instructions in this guide. After the installation, verify it by running the following command:

spl-token --version

Make sure you follow each step in the guide above as it also describes how to initialize a local wallet and airdrop SOL.

2. Creating a mint with close authority​

Let's create a mint account with the close authority extension, and then, to show that it works, we'll close the mint!

Let's create a mint with close authority extension using the CLI:

This extension requires following arguments:

  • create-token : The instruction that we want to execute.
  • --program-id : This flag is used to specified which program ID to use. TokenzQdBNbLqP5VEhdkAS6EPFLC1PHnBqCXEpPxuEb is the public address at which the Token Extension Program is deployed.
  • --enable-close : This flag specifies that we want to initialize the mint with close authority.

Run the following command:

spl-token create-token --program-id TokenzQdBNbLqP5VEhdkAS6EPFLC1PHnBqCXEpPxuEb --enable-close

We will see output similar to as shown below:

Creating token 3s6mQcPHXqwryufMDwknSmkDjtxwVujfovd5gPQLvKw9 under program TokenzQdBNbLqP5VEhdkAS6EPFLC1PHnBqCXEpPxuEb

Address:  3s6mQcPHXqwryufMDwknSmkDjtxwVujfovd5gPQLvKw9
Decimals:  9

Signature: fGQQ1eAGsnKN11FUcFhGuacpuMTGYwYEfaAVBUys4gvH4pESttRgjVKzTLSfqjeQ5rNXP92qEyBMaFFNTVPMVAD

To view details about the newly created mint, we can use the display command. This command will show relent details for a token mint, account or multisig. Let's pass it mint address of the previous step.

spl-token display <ACCOUNT_ADDRESS>

Now that we have a mint, we can close it with the following where <TOKEN_MINT_ADDRESS> is the resulting address from the previous step.

spl-token close-mint <TOKEN_MINT_ADDRESS>

By closing the account, we reclaim the rent lamports on the mint account. Remember, the supply on the mint must be zero.

As a challenge, repeat this process, but before closing the mint account, mint some tokens and then try to close it - see what happens. (Spoiler, it'll fail)

3. Creating a token account with immutable owner​

Let's test out another extension, a Token account extension this time. We'll create a new mint, and then we'll create an associated token account using the immutable owner extension.

First let's create a new vanilla mint with no additional extensions:

spl-token create-token --program-id TokenzQdBNbLqP5VEhdkAS6EPFLC1PHnBqCXEpPxuEb

You should get something simular to this:

Creating token FXnaqGm42aQgz1zwjKrwfn4Jk6PJ8cvkkSc8ikMGt6EU under program TokenzQdBNbLqP5VEhdkAS6EPFLC1PHnBqCXEpPxuEb

Address:  FXnaqGm42aQgz1zwjKrwfn4Jk6PJ8cvkkSc8ikMGt6EU
Decimals:  9

Signature: 3tX6FHvE24e8UHqSWbK5HRpBFxtCnDTRHASFZtipKkTzapgMGZEeNJ2zHAHSrSUs8L8wQGnLbvJiLrHuomyps39j

Save the resulting mint address, we'll use it in the next step.

Now let's mint one of these tokens to an associated token account (ATA) that uses the immutable owner extension. By default all ATAs enable the immutable owner extension. And all token accounts made with the CLI will be ATAs, so immutable owner will be enabled.

This extension requires following arguments:

  • create-account: The instruction that we want to execute.
  • --program-id (optional): The program ID we want to use. This is optional because the CLI will figure out the owning program of the mint.
  • --owner (optional): Public key of the owner's wallet. It will default to the current working public key which we can get by running the command solana address.
  • --fee-payer (optional): Keypair of the wallet paying for the transaction. It will default to the current working keypair, which can be found with solana config get.
  • <TOKEN_MINT_ADDRESS>: this is the mint account we got from the create-token command.

Run the following command to create the associated token account with the immutable owner extension:

spl-token create-account <TOKEN_MINT_ADDRESS>

After running this command, we will see out similar to as shown below.

Creating account F8iDrVskLGwYo53SdJnvBKTpN1C7hobgnPQMq6hLivUn

Signature: 5zX73E2aFVwcsvhCgBSF6AxWqydWYk3KJaTmeS4AY22FwCvgEvnodvJ7fzvBHZptqv3FMz6tbLFR5LbmiUHLUkne

Now we can mint some tokens to it with the mint function. Here are the arguments we have to provide:

  • mint: The instruction
  • <TOKEN_MINT_ADDRESS>: The address of the mint we got from the first step
  • <TOKEN_AMOUNT>: Amount to mint in tokens
  • <RECIPIENT_TOKEN_ACCOUNT_ADDRESS>(optional): This is the token account used to hold the tokens we created in the previous step. However, this defaults to the ATA of our current working keypair and mint. So this will automatically use the account from our last step.
spl-token mint <TOKEN_MINT_ADDRESS> <TOKEN_AMOUNT>

This will result in something like the following:

Minting 1 tokens
  Token: FXnaqGm42aQgz1zwjKrwfn4Jk6PJ8cvkkSc8ikMGt6EU
  Recipient: 8r9VNjnLqjzrpgkcgCozgvCBDQwWWYUL7RKwatSWnd6B

Signature: 54yREwGCH8YfYXqEf6gRKGou681F8NkToAJZvJqM5qZETJokRkdTb8s8HVkKPeVMQQcc8gCZkq4Kxx3YbLtY9Frk

Feel free to use the spl-token display command to get some info about the mint and token account.

4. Creating a non-transferrable ("soul-bound") NFT​

Lastly, let's create an NFT which will be non-transferable, sometimes called a 'soul-bound' NFT. Think of it as a achievement token which is exclusively owned by one person or account. For creating this token, we will use three extensions: metadata pointer, metadata and non-transferable token.

With the metadata extension, we can include metadata directly in the mint account and the non-transferable extension makes the token exclusive to the account.

The command takes following arguments:

  • create-token: The instruction that we want to execute.
  • --program-id: The program ID we want to use.
  • --decimals: NFTs are usually whole, and have 0 decimals
  • --enable-metadata: The metadata extension flag. (This initializes the metadata and metadata pointer extensions)
  • --enable-non-transferable: The non-transferable extension flag.

Run the following command to create a token initialized with the metadata and non-transferrable extensions.

spl-token create-token --program-id TokenzQdBNbLqP5VEhdkAS6EPFLC1PHnBqCXEpPxuEb --decimals 0 --enable-metadata --enable-non-transferable

We will see output similar to as shown below.

Creating token GVjznwtfPndL9RsBtAYDFT1H8vhQjx8ymAB1rbd17qPr under program TokenzQdBNbLqP5VEhdkAS6EPFLC1PHnBqCXEpPxuEb
To initialize metadata inside the mint, please run `spl-token initialize-metadata GVjznwtfPndL9RsBtAYDFT1H8vhQjx8ymAB1rbd17qPr <YOUR_TOKEN_NAME> <YOUR_TOKEN_SYMBOL> <YOUR_TOKEN_URI>`, and sign with the mint authority.

Address:  GVjznwtfPndL9RsBtAYDFT1H8vhQjx8ymAB1rbd17qPr
Decimals:  0

Signature: 5EQ95NPTXg5reg9Ybcw9LQRjiWFZvfb9WqJidxu6kKbcKGajp1U999ioToC1qC88KUS4kdUi6rZbibqjgJbzYses

After creating the mint with metadata extension, we need to initialize the metadata as specified in the output above. Initializing metadata takes the following arguments:

  • Mint address : Address of the mint to initialize the metadata for.
  • <YOUR_TOKEN_NAME>: Name of the token
  • <YOUR_TOKEN_SYMBOL>: Symbol by which the token will be identified.
  • <YOUR_TOKEN_URI>: URI for the token.
  • --update-authority (optional): The address of the account with the authority to update the metadata. This will default to the current working public key.

Run the following command to initialize the metadata:

spl-token initialize-metadata <TOKEN_MINT_ADDRESS> MyToken TOK http://my.tokn

Now, let's take a look at the metadata by calling our trusty display command.

spl-token display <TOKEN_MINT_ADDRESS>

Next, let's update the metadata for that mint. We will be updating the name of our token. Run the following command:

spl-token update-metadata <TOKEN_MINT_ADDRESS> name MyAwesomeNFT

Now let's see how we can add a custom field to our mint's metadata. This command takes the following arguments:

  • Mint address : Address of the mint to update metadata for.
  • Custom field name : Name of the new custom field.
  • Custom field value : Value of the new custom field.

Run the following command:

spl-token update-metadata <TOKEN_MINT_ADDRESS> new-field new-value

We can also remove the custom fields from the mint metadata. Run the following command:

spl-token update-metadata <TOKEN_MINT_ADDRESS> new-field --remove

Lastly, lets make it a real non-transferrable NFT. We do this by minting the NFT to our ATA and then removing the mint authority. This way the supply will only be one.

spl-token create-account <TOKEN_MINT_ADDRESS>
spl-token mint <TOKEN_MINT_ADDRESS> 1
spl-token authorize <TOKEN_MINT_ADDRESS> mint --disable

Now we have successfully created a non-transferrable NFT which is exclusively owned by our ATA.

That's it! This is how we can use the Solana CLI with Token Extension Program to use the extensions. We will dive deeper into these extensions in separate lessons and see how we can use them programmatically.

Challenge​

Go and try out different combinations of extensions using the CLI.

Hint: Take a look at your options by calling commands with the --help flag:

spl-token --create-token --help